ELARA™ FC-Series ID / THERMAL ANALYTICS SECURITY CAMERA / MODEL: FLIR FC-610 ID, 640X480, 10° FOV, NTSC

CODE : FLIR FC-610 ID, 640   

The Elara™ FC-Series ID is one of FLIR’s premium thermal security cameras for perimeter protection. The Elara FC-Series ID includes onboard video analytics capable of classifying human or vehicular intrusions, resulting in fewer false alarms. The Elara FC-Series ID also offers a wide range of high-performance lenses and multiple resolutions, giving greater flexibility in tailoring security systems to specific site conditions.

Description

The Elara™ FC-Series ID is one of FLIR’s premium thermal security cameras for perimeter protection. The Elara FC-Series ID includes onboard video analytics capable of classifying human or vehicular intrusions, resulting in fewer false alarms. The Elara FC-Series ID also offers a wide range of high-performance lenses and multiple resolutions, giving greater flexibility in tailoring security systems to specific site conditions.

Specification

Overview
Detector Type
Long-Life, Uncooled VOx Microbolometer
Dimensions (L x W x H)
Without sunshield: 259 x 114 x 106 mm/10.2" x 4.5" x 4.2" With sunshield: 282 x 129 x 115 mm/11.1" x 5.1" x 4.5"
Effective Resolution
307200
Focal Length
60 mm
Focus Range
Athermalized, Focus-Free
Pixel Pitch
17 µm
Sensitivity
Spectral Range
7.5 µm to 13.5 µm
Thermal Frame Rate
NTSC: 30 Hz - PAL: 25 Hz / 8.3 Hz
Warranty
Camera: 3 Years Sensor: 10 Years
Weight
2.4kg (5.25 lbs.)
Compliance & Certifications
Approvals
CE: EN55032; FCC 47 CFR Part 15, Subpart B, Class A (within CISPR 22:2008 Class A limits)
Certifications
IEC 60068-2-1:2007; IEC 60068-2-2:2007; ISTA-1A; IEEE 802.1x
Compliance
RoHS Directive 2011/65/EU; WEEE 2012/19/EU
Connections & Communications
Analog Video Output Composite
1Vp-p (PAL or NTSC), 1 x BNC 75Ω
Composite Video NTSC or PAL
Hybrid system with IP & analog video
Control Input/Output
1x Dry Contact in; 1x Relay Out (rated load 0.025A@ 5VDC)
Ethernet
10/100 Mbps
External Analytics Compatible
Yes
Network APIs
FLIR SDK FLIR CGI ONVIF Profile S
Supported Protocols
IPV4, HTTP, Bonjour, UPnP, DNS, NTP, RTCP, TCP, UDP, ICMP, IGMP, DHCP, ARP, SCP, FTP, RTP/RTSP, Unicast/Multicast, TCP/IP, HTTP, IEEE 802.1X
Video Over Ethernet
Two independent channels of H.264 (Restricted VBR and CBR,10kbps-4Mbps, MPEG4, and MJPEG)
Environmental
Humidity
0-95% relative humidity
IP Rating (dust & water ingress)
IP66 & IP67
Operating Temperature Range
-50°C to 70°C/-58°F to 158°F (Continuous Operation) -40°C to 70°C /-40°F to 158°F (Cold Start)
Shock
MIL-STD-810G "Transportation"
Storage Temperature Range
-50°C to 85°C/-58°F to 185°F
Vibration
IEC 60068-2-27
Imaging & Optical
Array format
640 × 480
E-Zoom
4x continuous E-Zoom
f-number
f/1.25
Field of view (FOV)
10° × 8.2°
Image Uniformity Optimization
Automatic Flat Field Correction (FFC); Thermal and Temporal Triggers
Lens
60mm
Streaming Resolution
D1: 720 × 576 4CIF: 704 × 576 Native: 640 × 512 Q-Native: 320 × 256 CIF: 352 × 288 QCIF: 176 × 144
Thermal AGC Modes
Auto AGC, Manual AGC, Plateau Equalization AGC, Linear AGC, Auto Dynamic Detail Enhancement (DDE), Max Gain Setting
Thermal AGC Region of Interest [ROI]
Default, Presets and User definable to insure optimal image quality on subjects of interest
Measurement & Analysis
Analytics Features
Region Entrance/Intrusion Detection, Crossover/Fence Trespassing; Auto/Manual Depth Setup, Human and Vehicle Rules, Hand-off target to PTZ tracking, Tampering
Analytics Management
Web-based confguration and management, masking of analytic detection areas, adjustable sensitivity, automatic responses, remote I/O control
Power
Power Consumption
Source POE (802.3af) POE+ (802.3at) 12VDC 24VDC 24VAC(VA) Heater off
Surge Immunity on AC Power Lines
EN 55024: 2010 and 55022: 2010 to 4.0kV on AC aux power lines; EN 50130-4:2011; IEC 62599-2:2010
Surge Immunity on Signal Lines
EN 55024: 2010 and 55022: 2010 to 4.0kV
Storage & Archive
Local Storage
Support for 32GB SD Card (not supplied)

Feature

• Auto calibration for depth setup for a simple and reliable configuration.

• No additional measurement tools are needed, requiring only a single installer on site

• Allows analytics in corridor mode, reducing the number of cameras and improving the total cost of ownership

• Target hand-off to PTZ camera auto-tracking

•Superior image quality in low-contrast conditions

• FLIR’s custom AGCs provide images with extremely high contrast

• Dynamic Detail Enhancement (DDE) creates sharp edges and contrast that improve analytics performance

• Choose from 17 high-performance lenses suitable for any perimeter or open area, including QVGA from 4° to 69° fields of view and VGA from 8° to 90° fields of view

• High performance optics deliver clear thermal video

Highlight

Best-in-class perimeter protection

  • RELIABLE ONBOARD ANALYTICS

    The Elara FC-Series ID accurately classifies humans and vehicles, and enables target hand-off to PTZ camera auto-tracking.

  • INDUSTRY-LEADING IMAGE QUALITY

    The Elara FC-Series produces superior thermal image quality in low-contrast conditions using custom AGCs and Dynamic Detail Enhancement (DDE).

  • HIGH-PERFORMANCE LENSES

    Choose from a wide range of high-performance lenses for optimal detection ranges in all conditions.

Download

FC-SERIES APPLICATION NOTE

DISCOVERY NETWORK ASSISTANT (DNA) RELEASE NOTES (V.2.2.0.35, 29-AUG-2018)

FLIR FC-SERIES ID A&E SPECIFICATIONS

FLIR THERMAL SECURITY PRODUCT MATRIX

FLIR FC-SERIES ID DATASHEET

FC-SERIES ID QUICK CONNECT GUIDE

FLIR_RELEASE_NOTES_FC-SERIES-ID-AND-O-SECURITY-PATCH-V1.1

FLIR FC-SERIES ID INSTALLATION MANUAL

SUPPORTED 3RD-PARTY PLATFORMS - THERMAL CAMERAS

FC-SERIES O AND FC-SERIES ID INTERCONNECT DOCUMENT (ICD)

Related Products

Compare

HideShow